This evaporator cover can be used on any Samsung RS21 fridge freezer that does not have a Coolzone compartment. The RS21 Coolzone model is usually denoted by the letter 'J' or 'K' after the RS21. This evaporator cover is also compatible with the SRS range. INCLUDES MOTOR AND SENSOR PART NUMBER; DA97 05290Q As an example, the most commonly purchased Coolzone RS21 models will have a model number such as RS21JLAL or RS21KGRS. If you have a model with the letter 'J' or 'K' immediately after the 'RS21', this evaporator cover WILL NOT fit your fridge freezer. If you have the letters 'D', 'F', 'N' or 'W' after the 'RS21', this evaporator cover should be the correct part for your fridge freezer. A typical example of this would be something like RS21DCNS, RS21FCNS, RS21NCMS or RS21WCNS, but there are many variations to the last 3 letters of the model number. These evaporator covers are now the required replacement for most of the SRS range as well. This includes all models that start with the model number 'SRS2025', 'SRS2026', 'SRS2027', 'SRS2028' and 'SRS2029'. This fits the following (RS21DABB1/XEU) RS21DABB (RS21DCMS1/XEU) RS21DCMS RS21DCNS (RS21DCSV1/XEU) RS21DCSV (RS21DGRS1/XEU) RS21DGRS (RS21DLAL1/XEU) RS21DLAL (RS21DLMR1/XEU) RS21DLMR (RS21DPSM1/XEU) RS21DPSM (RS21FCNS1/XEU) RS21FCNS (RS21FCSV1/XEU) RS21FCSV (RS21FGRS1/XEU) RS21FGRS (RS21NABB1/XEU) RS21NABB (RS21NCMS1/XEU) RS21NCMS (RS21NCNS1/XEU) RS21NCNS (RS21NCSV1/XEU) RS21NCSV (RS21NGRS1/XEU) RS21NGRS (RS21NPSV1/XEU) RS21NPSV RS21WASM RS21WCNS RS21WCSV It is also used in the following Samsung models: SRS2026CSS, SRS2026CVW, SRS2026DVW SRS2028C, SRS2028DVW, SRS2028CVW, SRS2028CSS, SRS2028, SRS2028FSS LAS, SRS2028FSM SRS2029CVW, SRS2029CSS, SRS2029FSM This fits only fits RS21 units without the Cool Select zone **If you have an RS21J or RS21K This does not fit** This Samsung back panel comes with a modification to the drain hole of the fan motor within the back panel. The mod is designed to stop the icing building up and blocking the drain hole, which in turn causes a build up of ice around the fan blade. It is a heat transfer clip which contacts a heat transfer plate on the new back panel, full instructions are included. IF YOU ARE UNSURE HOW TO FIT THIS, PLEASE SEEK PROFESSIONAL HELP. . The box has been opened to check condition of cover and for photo's. PLEASE NOTE, PLEASE ENSURE THIS PART IS : A) WHAT YOU NEED, B) THE RIGHT PART FOR YOUR APPLIANCE C) YOU KNOW HOW TO FIT THIS PART(or know someone who can)
|